Open Front Bins
Tote Boxes
Carts & Racks
SST Trays
SST Accessories
SST Carts
HumiPak
PPE
Brushes
Tip Protectors
Foam Products
Bundling Products
Spray Gun
Mitts & Gloves
Washer Baskets
Instrument Repair
Paper Bags
Optical Inspection
Bulb & Bladder
Pre-Cleaning Products
Adjustable Stringer
Flexistem
Laparoscopic Trays
Scope Trays
Micro Surgery Trays
Steriking Story
Steriking Packaging
Tray Liners
Accessories
Sterility Assurance
Count Sheet Holders
Tamper Evident Seals
Tamper Evident Tape
Emergency Boxes
Soft-Sided Cases
AccuPoint
Artificial Test Soil
AquaTest
CartWashCheck
FlexiCheck
HemoCheck
LumCheck
ProCheck-II
RoboticArmCheck
SonoCheck
TempaChek
Test Kits
TOSI
Surveillance Testing
Tray Tags
Marking Tape
Tray Labels
Label Guns
Label Tape
Color Dots
Page Markers
Autoclave Tape
Message Labels
Space Tape
Trace Marks
Fine Signs
CS Heart Sign
InstaGrids
Lumen Sizer
Designed to assist healthcare workers in selecting the appropriate brush for cleaning internal lumens, the reusable Lumen Sizer is 3.25 inches in diameter and made of photopolymer resin. The latex-free Lumen Sizer helps determine the size of a lumen opening by taking the lumened item and placing it over the raised range of lumen sizes till the correct size is selected. The Lumen Sizer has the following range of sizes: 1.35mm, 1.75mm, 2mm, 2.45mm, 2.75mm, 3mm, 3.45mm, 3.75mm, 4mm, 4.45mm, 4.75mm, 5mm, 5.45mm, 5.75mm, 6mm, 6.45mm, 7mm, and 7.75mm. The Lumen Sizer is available for individual purchase. Read More...
Wire Tester and Bi-Polar Fixture - Insulation Tester Accessories
Optional accessories for the Insulation Tester include the Wire Tester and the Bi-Polar Fixture. The Wire Tester accessory used with an HV Red Lead Wire is available for testing wires by locating and identifying defects such as pinholes or cracks in the conductive core. The Bi-Polar Fixture works in conjunction with the saddle, ground wire and brush electrode.
Click here to view the Operation Manual
Read More...
Cable Continuity Tester
Designed to test the quality of monopolar and bipolar cords, the Cable Continuity Tester is user-friendly, durable and encased in plastic, which can be cleaned with alcohol or an IPA wipe. Simply position the “ON” switch to bipolar or monopolar for the desired test. The Bipolar-OFF-Monopolar switch should illuminate on the desired side. Next, insert the cable and test by lightly pulling at the connections. When complete, position the rocker to the “OFF” position. If the green light remains illuminated while pulling at the connections, then the cable passed testing. If the light flickers or doesn’t illuminate, this indicates the cable failed testing. The Continuity Tester requires one 9V battery that can be replaced by sliding out of the battery door. Each Cable Continuity Tester comes with a 9V battery and within a case. Read More...
Shaver Leak Tester
Designed for pressure testing arthroscopic shavers to help identify leaks caused by failing seals that degrade over time from repeated use and processing, the Shaver Leak Tester assists healthcare workers in reprocessing areas to make sure their shaver is working properly by using both a hand pump to apply pressure and a testing stop made from polypropylene to create a temporarily closed system within the fluid pathway of the shaver to pressure test for leaks. Utilizing positive pressure allows the user to confirm if the internal seals are fully intact or if the shaver needs to be sent out for repair. The Shaver Leak Tester helps in reducing the potential for cross-contamination, damage and costly repairs that result from using a shaver with leaks.
Simply, select the appropriate brand specific testing stop and insert the stop into the distal end of the shaver’s handpiece until it is fully seated. Then, connect the open end of the silicone tubing attached to the pressure gauge, to the stainless-steel discharge port located at the proximal end of the handpiece. Next, use the bulb of the hand pump to apply pressure and observe that the pressure gauge is displaying and maintaining a positive value. Confirmation of positive static pressure on the pressure gauge indicates no leaks in the fluid pathway and is considered a passing result.
The brand-specific Shaver Leak Tester stops are not interchangeable and offered for the following shavers: the Midas Rex shaver, the Stryker Formula shaver, the Stryker Small Joint shaver, the Dyonics shaver, the Conmed Linvatec shaver, and the Arthrex shaver.
Read More...
LBK Weighing Scale
LBK scales offer quick and easy weighing right out of the box. The low profile design is compact and allows these scales to be used where you need them. Simple to use with only 5 keys, which are color coded to highlight the most used keys for faster operation. Basic weighing tasks are quick and easy with the LBK weighing scales. And with percentage weighing, basic parts counting and 5 weighing units the LBK can also be used for more complex weighing functions if needed. Read More...
Stainless Steel Washing Sleeve
Manufactured for effective transportation, washing and storage of sensitive medical instruments, the perforated Stainless Steel Washing Sleeves have a 17mm internal diameter and external diameter of 19mm. Included with the washing sleeves are two silicone caps that have crossed perforations for alternatively inserting fine tipped instruments, a circular stainless-steel identification tag capable of laser engraving and a stainless-steel ring-holder that joins the tag to the washing sleeves. The Stainless Steel Washing Sleeves are heat-resistant up to 275 °F, and are available in four different lengths of 2.16 In., 8.66 In., 15.16 In., and 19.48 In. Read More...
Insulation Tester with optional Bi-Polar Fixture and Wire Tester
Designed for electrically testing electrosurgical instruments, the low frequency high voltage Insulation Tester is used to detect and locate defects such as pinholes, cracks and bare spots in the jacket or coating of laparoscopic and bi-polar electrosurgical instruments. The Insulation Tester is a handheld, portable unit that tests the insulation integrity of electrosurgical equipment for flaws in protective coatings applied over conductive instrument surfaces in order to prevent inadvertent tissue burns, which may occur during electrosurgical instrument procedures. Manufactured with a rechargeable battery, the Insulation Tester maintains applied test voltage with constant current source, features full test current at low voltages, limited output current for operational safety, easy to read LED Indicators, as well as LED display of alarm and battery charge. The Insulation Tester comes with the following reusable and interchangeable accessories: ground wire with alligator clip, ring electrode, tri-hole electrode, brush electrode, saddle, and case. The Bi-Polar Fixture accessory that works in conjunction with the saddle, ground wire and brush electrode can be purchased separately. Additionally, an optional Wire Tester accessory used with an HV Red Lead Wire is available for testing wires by locating and identifying defects such as pinholes or cracks in the conductive core.
Healthmark offers Insulation Tester Calibration Service for the MM513-100 Insulation Tester unit. This service allows healthcare facilities to send to Healthmark their McGan Insulation Tester for annual routine calibration to ensure that the unit is operating at the appropriate voltage. Recalibration is recommended annually and when the Insulation Tester’s integrity is in question. See the Insulation Tester IFU for further information on the operation of the Insulation Tester. A Loaner Insulation Tester is provided while your Insulation Tester is in for calibration.
Click here to view the Operation Manual
Click here to learn more
Read More...
Leak Tester Tester
Testing your facilities endoscope leak tester prior to use is a necessary step to ensure leak testing demonstrates accurate results, which is why we’ve created the Leak Tester Tester. Designed to check the accuracy of air pressure provided by automated and handheld endoscope leakage testers, the Leak Tester Tester assists healthcare workers in the reprocessing areas to make sure their endoscope leak tester is working properly by testing the functionality of the pump and the connector for leaks prior to using. The Leak Tester Tester assists in reducing the potential for cross-contamination, damage and costly repairs that result from using an endoscope with leaks. Manufactured from stainless steel, the testers come in a package of four or can be purchased separately. They are offered for the following leak testers: the Olympus automated leak tester, the Olympus handheld tester, the Pentax handheld tester and the Karl Storz handheld tester. Simply attach the desired leak tester tester to your facilities endoscope leak tester, turn it on or pressurize the bulb, and read the pressure on the gauge, which gives a quick and objective result of the amount of air being expelled from the leak testers.
Healthmark offers Leak Tester Tester Calibration Service for our Leak Tester Testers. This service allows healthcare facilities to send Healthmark their Leak Tester Testers for an annual, routine calibration. The calibration service recertifies that the Leak Tester Testers are functioning within specifications. In addition to annual calibration, should the Leak Tester Tester be dropped, the gauge inadvertently submerged in fluid or not displaying a zero PSI reading prior to use then it should be returned for proper re-calibration. A Loaner Leak Tester Tester is provided while your Leak Tester Tester unit is in for calibration. Read More...
No Waste, No Fuss with Flexistem Brushes
Flexistems are the disposable brushes that are easily customized to the cleaning needs of all small bore items. The nylon bristles on the Flexistem work like a brush to clean and safely dislodge deposits. Flexistems comes in 6 different diameters and can be doubled over to increase the cleaning diameter. By dispensing exactly what is needed, the right length of brush is used. By disposing of the brush after use the chance for cross contamination is eliminated. Flexistem cleaners are available in two styles - Fine and Ultra-Fine for very small lumens.
CLICK HERE FOR A FREE SAMPLE! Read More...
Instrument Cleaning Brushes
More Info | Product Brochure | Buy Now!
Select from the ultra small to large. Healthmark has a brush that is the right size and style to clean your instruments. Choose from extra long and small diameter tube brushes from your lumens or from handled brushes with nylon and stainless steel bristles. Read More...
Tip Protectors
Choose from three different styles and many different sizes of tip protectors. Styles include poly tip protectors, paper tip protectors and foam tip protectors. Each compatible with steam and EtO sterilization. Read More...
Foam Protection Products
Protect instruments with pouches, sheets, anchors and other designs created for securing delicate instruments during sterilization, transportation and storage. Read More...
Instrument Bundling Products
Products for the organization and presentation of instruments. Products include the EasyStringer™, the Pro-Ties™ and the Instrument Organizer. Read More...
Spray Gun
Healthmark’s new Spray Gun is the ideal tool for cleaning cannulas, endoscopes, glassware, pipettes, syringes, catheters, curettes, cystoscopes and a variety of other instruments, and articles used in surgery, clinics, laboratories, and doctor offices in other words, anywhere that the highest level of cleanliness is necessary. Read More...
Heat Mitts
Choose from several styles and sizes of Mitts designed to protect the user from heated items being retrieved from a sterilizer, a cart washer or other sources. Read More...
Instrument Washer Baskets
Choose from a the very large to the very small, the right size basket to place items safely inside an automated instrument washer Read More...
Instrument Repair Products
Instrument repair tags, scissor sharpness and other products related to instrument repair Read More...
Medical Grade Paper Packaging for to Organize and Safeguard Instruments
These medical grade paper products are designed to safely organize surgical instruments within a wrapped or closed container, in compliance with AAMI ST79 Guidelines. The medical paper is completely porous to sterilant and also is highly absorbent, helping to fight wet pack. Read More...
Optical Inspection Devices: Extending the Visual Standard
AAMI ST79 recommends the use of visual aids to improve post cleaning inspection of instruments. See what you have been missing when it comes to damaged or soiled surgical instruments with these professional quality optical inspection tools that are as powerful as they are affordable. Read More...
Disposable Bulb & Bladder Assembly
Helps eliminate risk of cross contamination 100% Latex Free, no filter required Cost effective compared to lengthy processing time on reusable’s Assembled in the U.S.A. Packaged either sterile or non-sterile. Read More...
