Open Front Bins
Tote Boxes
Carts & Racks
SST Trays
SST Accessories
SST Carts
HumiPak
PPE
Brushes
Tip Protectors
Foam Products
Bundling Products
Spray Gun
Mitts & Gloves
Washer Baskets
Instrument Repair
Paper Bags
Optical Inspection
Bulb & Bladder
Pre-Cleaning Products
Adjustable Stringer
Flexistem
Laparoscopic Trays
Scope Trays
Micro Surgery Trays
Steriking Story
Steriking Packaging
Tray Liners
Accessories
Sterility Assurance
Count Sheet Holders
Tamper Evident Seals
Tamper Evident Tape
Emergency Boxes
Soft-Sided Cases
AccuPoint
Artificial Test Soil
AquaTest
CartWashCheck
FlexiCheck
HemoCheck
LumCheck
ProCheck-II
RoboticArmCheck
SonoCheck
TempaChek
Test Kits
TOSI
Surveillance Testing
Tray Tags
Marking Tape
Tray Labels
Label Guns
Label Tape
Color Dots
Page Markers
Autoclave Tape
Message Labels
Space Tape
Trace Marks
Fine Signs
CS Heart Sign
InstaGrids
Distal Soak
Tubes fashioned from polypropylene, paired with silicone lids and a Plexiglas® tube holder (sold separately) for proper handling. The Distal Soak is designed to protect the delicate tips, and keep the distal end of surgical instruments moist after clinical use to facilitate cleaning. They come in two styles: With a closed hole cap that is filled with solution prior to inserting the device; Or, with an open hole cap design that is used when flushing the solution through the internal channel of the device in compliance with the device manufacturers IFU. Use of the Distal Soak will help to prevent drying of gross contaminants of the soiled device before cleaning procedures begin. Read More...
Endo Bins and Trolley Set
The Endo Bin and Trolley Set are comprised of five (5) lockable Round Soakers trays (20” diameter) to safely hold flexible scopes without over bending. These trays easily slide onto a specially designed stainless-steel Trolley. The lockable trays allow you to create a controlled delivery and retrieval system for endoscopes with tamper evident seals. For your convenience we have included a pre-packaged sample pack of 2 “Clean” seals (green) and 2 “Dirty” seals (red-biohazard) for each lockable Round Soaker tray. Read More...
SST Liners
Eliminate confusion between reprocessed and soiled medical devices with our color-coded SST Liners. The single-use liners assist with identification, temporary storage and transportation of medical equipment by providing an enclosed environment for instruments. Made from low-density polyethylene, the color-coded tray liners are 36 x 18 Inches, 1 Mil and available in the following colors: Red, Green and Clear. Simply, line the base of the tray using the clear liner to ensure interior base and walls are covered; place clean device in tray along with the red biohazard liner for post-procedure use and cover with the green clean liner. Upon procedure completion discard the green liner, place used device back in tray and cover with the red biohazard liner to indicate item is ready for transport to the Reprocessing area. The SST Liners are available in three colors and available in a box of one-hundred. Read More...
538DP-Applied
Drain contaminated fluids quickly, easily and safely with the optional Drain Plug. Can be installed in any SST Tray. Is autoclavable to 285°F. Read More...
SST-Latch
Seal the SST-2136 and SST-105 tight with optional latches. Factory applied when specified with your order, these stainless steel latches will keep these trays sealed tight. Order 2 latches per tray. Read More...
Splash-Proof Lid
No amount of sloshing and swishing will escape this splash proof cover. This lid may be used with an existing SST-2136 base or as part of a new system. Read More...
SST Tray Stands
With these tray stands, you can replace the outdated basin and ring stand with a system large enough to contain modern instruments - the SST-2136. Choose from a single tray or a double tray style. Manufactured of 100% stainless. Tray systems are sold separately. Read More...
Keep Soiled Instruments Moist with Humipak
The Humipak consists of a layer of highly absorbent material sandwiched between two layers of water proof film. To use, add the specified amount of water to the absorbent layer, place individual instruments, or an entire instrument tray inside the Humipak and seal with the peel away adhesive strip. This creates a watertight, moist atmosphere that will prevent organics from drying over an extended period of time. Visible Contents atmosphere that will prevent organics from drying over an extended period of time. Further, the transparent film allows observation of the contents and a list of contents and/instructions can be written directly onto the film. Testing has demonstrated that items will remain moist for up to 3 days, depending upon the type of instruments, and the exact composition of the residue. Humipaks are available in four sizes - full tray and half tray dimensions. Keep instruments moist and ready for effective cleaning with Humipak! Read More...
